Repairing a garage door may require the help of a professional just because of its complexity. In this article, you’ll learn how to repair a garage door and fix its common problems without having to spend much.
Just as in some other parts of our homes, we pay little or no attention to our garage door until it finally stops working. But the good news is that you can repair a garage door all by yourself. Hence, saving you the cost of having to hire a professional.
In the first place, to steer clear of any garage door problem, all you need to do is adopt a maintenance routine. Maintaining your garage door will save you the stress of having to repair it occasionally.
Can I fix a broken garage door?
Yes, in most cases, you can fix a broken garage door all by yourself. However, there will be times DIY repairs may not be possible. Then at that point, you’ll have to call a professional for help.
How to repair a garage door opener.
Garage door openers can stop working all of a sudden. Several minor problems can cause this. But, there are solutions.
First and foremost, you’ll need to check if the door opener isn’t faulty. If closed, pull the emergency release cord and pull up the door. If this doesn’t work, the fault might not be from the opener itself. Instead, you might want to check if the door needs repair itself.
If you can operate the door by using a wall switch, but the remote doesn’t seem to work, you might have to change the batteries, and it could be as simple as that. On the other hand, if changing the battery doesn’t help, it could mean you need to get a new remote control.
If the Garage door doesn’t open completely, the rollers may need lubrication, and if the door wouldn’t close completely, inspect if the safety sensors are not hindered by litter.
How to repair garage door springs
Garage door springs can wear out over time, and it’s different from other garage door problems that happen all of a sudden. Once the garage door proves hard to lift and the opener struggles, it’s high time you replaced the springs.
You’ll need the exact model and the exact length of the springs to replace the old one. Replacing a garage door spring requires some level of mastery. If at any point you get confused or overwhelmed, it’d be advisable to hire a professional.
Repairing a squeaky garage door
A garage door that squeaks can be tiresome. Once you begin to hear your garage door squeaking, then you need to pay more attention to it. The Squeaking may result from the rollers; all you need to do is lubricate them with a garage door lubricant.
The hinge that clenches several parts of the door might as well be the issue. Lubricating them from time to time will avoid these noises. Also, try lubricating the springs, the squeaks can be as a result of that also. Lubricate the spring from the top so it moves to the base of the spring.
Maintaining a garage door
Maintaining a garage door will help avoid a lot of garage door issues. These are some things you should do regularly.
● Ensure you clean and lubricate the garage door parts. Do this from time to time.
● Carefully use a broom to take out any dust or litter.
● Check for any loosened bolts and ensure you tighten them.
● Check the rollers. If they aren’t working well, replace them.
Sometimes it’s best to consult a professional when it’s time to repair your garage. This is especially where the problem is quite complex. However, you can easily repair some faults. These simple steps will help you repair your garage door without stress and at a low cost.